Guides: Eat-The-Grease ETG Microbe Enzyme BioCatalyst
Eat-The-Grease “Your Waste Our Passion”
Application
- Undersink Grease Traps
- Kitchen/Toilet Floors & Drainages
- Air Conditioners
- Room/Toilet Housekeeping
- Urinal Bowls Housekeeping
Documentation
- HALAL
- Acute Oral Toxicity Study, LD50 (Median Lethal Dose)
- Antibacterial Activity Evaluation
- Material Safety Data Sheet
1. APPLICATION: UNDERSINK GREASE TRAPS
- Eliminate FOG (fats, oils, grease).
- Prevent drainage pipe blockages.
- Control odors.
- Reduce pest attractions.
INSTRUCTIONS

- Mix 10 grams of ETG MultiX in 20 litres of water. (Adjust according to type of food preparation or grease trap size, at the same ratio).
- Let the mixture sit for 18-24 hours to allow for full-cultured. (Keep the water container lid open, and do not wait more than 36 hours as it may produced unpleasant sour smell as a result of over-cultured.)
- During the kitchen shutdown, pour one half of the ETG-cultured into the sink connected to the grease trap.
- After normal kitchen floor cleaning, use the second half of the ETG-cultured to mop the floor. This serves as cleaning and odor control to keep the kitchen floor and floor trap fresh throughout the day.
- Repeat the above steps daily for ongoing preventive maintenance.
RECOMMENDATION
- Coffee Shops: 20-50 grams of ETG MultiX in 40-100 litres of water
- Fast Food Restaurants: 50 grams of ETG MultiX in 100 litres of water
- Italian/Western Cuisines: 50 grams of ETG MultiX in 100 litres of water
- Chinese/Thai Cuisines: 50-100 grams of ETG MultiX in 100-200 litres of water
- Malay/Indian/Mamak Cuisines: 100 grams of ETG MultiX in 200 litres of water
- Hotel Main Kitchens: 100-200 grams of ETG MultiX in 200-400 litres of water
(For further assistance or safety information, refer to the product label or contact customer support.)
2. APPLICATION: KITCHEN/TOILET FLOORS & DRAINAGES
- Eliminate FOG (fats, oils, grease).
- Prevent drainage pipe blockages.
- Control odors.
- Reduce pest attractions.
INSTRUCTIONS

- Mix 10 grams of ETG MultiX in 20 litres of water. (Adjust according to type of floor size, at the same ratio).
- Let the mixture sit for 18-24 hours to allow for full-cultured. (Keep the water container lid open, and do not wait more than 36 hours as it may produced unpleasant sour smell as a result of over-cultured.)
- After normal floor cleaning, pour the ETG-cultured into the floor-trap in the affected area, approximately 1-2 litres on each point.
- Repeat the above steps daily according to the seriousness of the condition. Or repeat monthly for ongoing preventive maintenance.
(For further assistance or safety information, refer to the product label or contact customer support.)
3. APPLICATION: AIR CONDITIONERS
Condensation water produced by AC can create slime and bio-films in the condensation tray and drainage system. If left untreated, this build-up may cause blockages, leading to water overflow. Such incidents can damage ceilings, fixtures, furnitures, or even result in room flooding.
Aircon Drain Guard (ACDG) is specifically designed to prevent these issues. It contains a carefully formulated blend of environmentally friendly enzymes that break down slime and bio-film effectively, ensuring clean and free-flowing drainage.
- Easy to Use: Simple application for routine AC maintenance.
- Eco Friendly: Non-chemical, non-toxic enzyme-based formula.
- Odor Reduction: Helps on musty smells caused by microbial growth.
- Economical: Long-lasting protection for 3 to 6 months.
INSTRUCTIONS

- Clean AC and condensation tray before application for best results.
- Place one paper-host tablet of AirconX into the tray.
- Replace the paper-host every 3 months to maintain optimal performance.
PERFORMANCE UPDATE
- Independently tested against Legionella Bacteria, a common and potentially harmful microorganism found in HVAC systems.
MAINTENANCE TIPS
- Combine with routine AC servicing for extended life and efficiency.
- Store unused paper-hosts in a cool, and dry place.
(For further assistance or safety information, refer to the product label or contact customer support.)
4. APPLICATION: ROOM/TOILET HOUSEKEEPING
- Eliminate Ammonia/Nitrate related.
- Control grouting mold from growing in the public toilet.
- Clean up bio-film clogged in the piping.
- Reduce cigarette smell.
INSTRUCTIONS

- Use one tablet HygieniX, dilute in a bucket of 5–10 litres water.
- Wait for 5 minutes to allow the tablet completely dissolved.
- Fill up the HygieniX-water in a foggy-spray, and spray the polluted air in the affected area. For public toilet, suggest to spray whenever there is smell or every 3 hours, especially the urinal bowls.
- Spray on the mold affected grouting area to kill the mold.
- You may also use the HygieniX-water to mop the floors as a cleaning agent, which also helps to keep the area odor-free all day.
- At the end of the day, pour the balanced HygieniX-water into floor-traps or urinal bowl, approximately 1-2 litres on each point. This helps to prevent smell from emitting. It will also help to prevent the piping from clogging regularly.
- Repeat the above steps on the following week as a regular preventive maintenance.
(For further assistance or safety information, refer to the product label or contact customer support.)
5. APPLICATION: URINAL BOWLS HOUSEKEEPING
- Effective against odor specifically Ammonia.
- Help to dissolve the Calcium scales accumulated in the drain pipe.
- Prevent clogging.
INSTRUCTIONS

- Use one tablet UrinalX, and leave on urinal bowl.
- Clean the urinal bowl with water (no detergent) as usual.
- Replenish every 1-2 weeks as a regular preventive maintenance, depending on the walk-in frequency.
(For further assistance or safety information, refer to the product label or contact customer support.)